§ 38-103. Sign requirements.

The applicator/operator is to post a sign under this article and shall model it after that shown in Figure A and shall see that it meets the requirements described in this section, as follows:

(1)

Size: four inches in height by five inches in width.

(2)

Composition: made of a sturdy, weather resistant material.

(3)

Type: rigid, as opposed to a flag.

(4)

Color: yellow background with black, bold-faced lettering.

(5)

Information contained on the front of the sign shall be the same words and symbols in the specified sizes as shown in Figure A.

(6)

Information contained on the back of the sign shall:

a.

Indicate the following:

1.

Date and time applied;

2.

Name of applicator/operator;

3.

Telephone number of applicator/operator;

b.

Be at least 18 point type ( 5/32 inch) in size; and

c.

Be either stamped or hand printed on the sign, printed on a stick-on label and placed on the sign, or printed on the sign.

(7)

Stake: flexible, preferably not wire.

(8)

Posting height: the bottom of the sign shall be at least 12 inches but not more than 16 inches above the surface of the soil.

(Ord. No. O-95-3-103, § B, 4-24-95)

Editor's note

The figure referred to in the above section is not printed herein but is on file in the county offices.